From the cabin to the network
Inside the cabin, passengers join a Wi-Fi network just as they would at home or in an office. A router in the avionics bay collects the traffic and hands it to a modem, which talks to the outside world through an antenna on the fuselage or in a fairing on the tail. On the ground, a network operator connects the signal to the internet. Everything between that router and the ground station decides how fast the connection is, where it works and how quickly it responds.
Three ways to reach the ground
Air-to-ground (ATG). The aircraft talks to a network of ground towers, much like a mobile phone. The antennas are small and light, and the delay is short. The limitation is coverage: the service only works over land where towers exist, so it ends at the coast. The best-known business aviation network covers the continental United States and parts of Canada. In Europe, the European Aviation Network combines mobile ground towers with a satellite, mainly for airlines.
Geostationary satellites (GEO). These satellites orbit about 35,786 km above the equator and stay over the same point on Earth, so a handful of them can cover most of the globe. Ku-band and Ka-band services deliver broadband speeds over oceans and remote regions. The distance has a price: a signal travels from the aircraft to the satellite, down to a ground station and all the way back, so every round trip takes around half a second or more. Video calls work, but the delay is noticeable. Coverage also thins out near the poles, where the satellites sit very low on the horizon.
Low Earth orbit (LEO). New constellations use thousands of satellites only a few hundred kilometres up. Starlink, the largest, flies at roughly 550 km. Because the distance is so short, the delay is similar to a home broadband line, and coverage includes the oceans. The satellites cross the sky within minutes, so the aircraft needs an electronically steered flat-panel antenna that hands over from one satellite to the next without moving parts.
Iridium also operates satellites in low Earth orbit, in the L-band. Its connection is much slower than broadband, but the antennas are very small and the network covers the whole planet, including the poles. It is widely used for messaging, cockpit data and as a backup link.
The options at a glance
| Network | Coverage | Delay | Typical use |
|---|---|---|---|
| Air-to-ground | Over land with tower coverage | Short | Flights within one region, mainly North America |
| GEO satellite (Ku/Ka-band) | Most of the globe, thinner near the poles | Around half a second or more | Long-range flights, email, browsing, streaming |
| LEO broadband | Global, including oceans | Short | Video calls, cloud work, long-range flights |
| LEO L-band (Iridium) | Global, including the poles | Moderate | Messaging, cockpit data, backup |
Why an installation takes time
Adding connectivity changes a certified aircraft. The antenna, its fairing, the wiring and the cabin equipment are approved through a Supplemental Type Certificate (STC) for each aircraft type; for aircraft on a European register, the STC must be issued or validated by EASA. Because the fuselage or tail has to be opened, the work is usually planned together with a scheduled maintenance check. Weight and balance, electrical load and the aircraft documentation are updated before it returns to service.
Which system suits which aircraft
There is no single best system. The right choice depends on where the aircraft flies, how passengers use the connection, which antennas the airframe can carry and what the data plan costs to run. An aircraft that stays over continental Europe has different needs from one that crosses the Atlantic every week. For owners, it pays to review the connectivity set-up together with the aircraft's real flight profile before committing to an upgrade.

